Kardex Shuttle XP 500 Vertical Lift Module – 2 units, 4050×813

EUR 36,174

1 of 2 sold, 1 left for sale.

We currently have two Kardex Shuttle XP 500 units with extra-wide trays for sale. With a tray width of 4,050 mm, these Vertical Lift Modules are rare but in high demand on the used market. As usual, this generous width allows for compact storage of small items, but it also enables efficient storage of larger or longer goods. Each tray can also hold up to 490 kg, which further increases the possibilities for storing and handling heavier goods.

These machines have been serviced annually and have been kept in a clean environment, so they are in very good condition.

Each Vertical Lift Module occupies a floor area of approximately 12.79 m², with a width of 4,380 mm and a depth of 2,920 mm. Despite their compact size, the modules offer a high storage capacity. Each tray has a storage area of 3.29 m², and with a total of 41 trays, this provides a total storage area of approximately 135 m² per lift unit.

The Vertical Lift Modules are available immediately.
Shipping and installation are additional.

Model year: 2018
Manufacturer: Kardex Remstar
Manufacturing year: 2018
Modell: SHUTTLE-XP-500-4050x813
Height: 5,800 mm
Width vertical lift module / tray: 4,380 mm / 4,050 mm
Depth vertical lift module / tray: 2,921 mm / 813 mm
Number of Trays: Approx. 41 units per Vertical Lift Module
Maximum weight per Tray: 490 kg
Electronics: 3-phase, 400 V, 17 A

Unlike a Vertical Lift Module, a Vertical Carousel is designed so that the shelves move on a chain or conveyor belt; the shelves circulate within the machine’s shaft and are then presented at the opening.

A new, standard-equipped Vertical Storage System typically costs from 600,000 SEK (approx. 700,000 SEK). By choosing a used machine from Relevator, the investment cost can be significantly reduced. Our used Vertical Storage Systems typically cost between 175,000 and 450,000 SEK, depending on the Modell, manufacturing year, and condition.

Relevator always provides a performance warranty and, for installations, usually a machine warranty as well. The performance warranty means that we guarantee that the machine we sell is in working order. The machine warranty means that if a defect arises as a result of the installation, we will repair it. The machine warranty covers the mechanics and installation, but any electronics faults are not covered by the warranty.

Yes, Relevator always uses the manufacturers' installation teams or specialized contractors with expertise in this type of service.