Kardex Shuttle XP 500 1850×813 Vertical Lift Module

EUR 26,467

We are now offering a Kardex Shuttle XP 500 1850×813 from 2017. The Vertical Lift Module has been kept in excellent condition due to its use in a clean and well-maintained warehouse environment, which has minimized wear and ensured high performance. The current installation of the Vertical Lift Module is in a shaft, which has protected the panels and plates from damage, leaving them untouched. Additionally, the number of operating cycles on the machine is lower compared to normal usage.

With its low height and narrow opening, this Kardex machine is ideal for warehouses with limited space. Despite its compact design, it offers numerous trays, allowing it to efficiently maximize storage capacity without taking up much floor space. The combination of space efficiency and flexibility makes it an excellent choice for warehouses where every square meter counts.

The trays have a load capacity of 350 kg per tray. With a tray width of 1,850 mm and a depth of 813 mm, each tray provides approximately 1.50 m² of storage space. With around 60 trays, each Vertical Lift Module offers a total storage area of approximately 90 m², making it possible to maximize storage capacity in a relatively small footprint.

Available from week 45.
Shipping and installation is not included.

Model year: 2017
Manufacturer: Kardex Remstar
Manufacturing year: 2017
Model: SHUTTLE-XP-500-1850x813
Height: 5 850 mm
Width vertical lift module / tray: 2 180 mm / 1 850 mm
Depth vertical lift module / tray: 2 912 mm / 813 mm
Number of trays: Approx. 60 trays
Maximum weight per tray: 360 kg
Electronics: 3/N/PE 400V, 17A

Unlike a Vertical Lift Module, a Vertical Carousel is designed so that the shelves move on a chain or conveyor belt; the shelves circulate within the machine’s shaft and are then presented at the opening.

A new, standard-equipped Vertical Storage System typically costs from 600,000 SEK (approx. 700,000 SEK). By choosing a used machine from Relevator, the investment cost can be significantly reduced. Our used Vertical Storage Systems typically cost between 175,000 and 450,000 SEK, depending on the Modell, manufacturing year, and condition.

Relevator always provides a performance warranty and, for installations, usually a machine warranty as well. The performance warranty means that we guarantee that the machine we sell is in working order. The machine warranty means that if a defect arises as a result of the installation, we will repair it. The machine warranty covers the mechanics and installation, but any electronics faults are not covered by the warranty.

Yes, Relevator always uses the manufacturers' installation teams or specialized contractors with expertise in this type of service.