Kardex Megamat RS 180 Vertical Carousel

EUR 17,309

We are now offering a Kardex Megamat RS 180 from 2017 in good condition. What makes this Vertical Carousel unique is its low Height of 2,500 mm, which is perfect for businesses with limited roof space or special requirements for lower machines for efficient storage of goods.

An affordable and compact storage solution that maximises capacity in a small space and requires minimal installation. It is particularly suitable for confined spaces where dirt and dust-free storage is important. The unit is mechanically assembled, while fine-tuning and final commissioning are done on site.

Available for immediate delivery.

Model year: 2017
Manufacturer: Kardex Remstar
Manufacturing year: 2017
Modell: MEG RS 180.1.2450.6.406.08
Height of Vertical Carousel: 2 500 mm
Width Vertical Carousel / Carrier: 3 071 mm / 2 450 mm
Depth Vertical Carousel / Carrier: 1 671 mm / 628 mm
Number of carriers: 8 units of carriers
Maximum weight per carrier: 180kg
Electronics: 3/N/PE, 400 V, 16 A

A vertical carousel features a design in which the shelves are driven by a chain or belt in a carousel-like motion; the shelves rotate within the machine’s shaft and are then presented at the opening. A Vertical Lift Module, on the other hand, has an elevator that moves down the center of the module, where trays are stored on both the front and back sides. The elevator retrieves trays from inside the machine’s structure and then presents them at the picking opening.

A new, standard-equipped Vertical Storage System typically costs from 600,000 SEK (approx. 700,000 SEK). By choosing a used machine from Relevator, the investment cost can be significantly reduced. Our used Vertical Storage Systems typically cost between 175,000 and 450,000 SEK, depending on the Modell, manufacturing year, and condition.

Relevator always provides a performance warranty and, for installations, usually a machine warranty as well. The performance warranty means that we guarantee the machine we sell is in working order. The machine warranty means that if a defect arises as a result of the installation, we will repair it. The machine warranty covers the mechanics and installation, but any electronics faults are not covered by the warranty.

Yes, Relevator always uses the manufacturers' installation teams or specialized contractors with expertise in this type of service.