Sold

2 units Kardex Megamat RS 350 Vertical Carousels
EUR 25,551
Overview
We now have two Kardex Megamat RS 350 from 2012 for sale, both in very good condition. These vertical carousels have been used in a clean environment and have undergone annual servicing by the manufacturer since installation, ensuring their reliability and long lifespan.
The vertical carousels has 42 carriers per machine, and each carrier is 3,050 mm wide and 528 mm deep. This provides a storage area of approximately 67.64 m² per machine. Despite the machine occupying only 5.41 m² of floor space, it offers an impressive capacity in a very small footprint, making it both efficient and practical for storage.
Available immediately.
Shipping and installation are additional.
Technical Information
- Model year
- 2012
- Manufacturer
- Kardex Remstar
- Manufacturing year
- 2012
- Model
- MEG RS 350.1.3050.5.343.42
- Height vertical carousel / carrier
- 8 010 mm / Free height on the carrier approximately 343 mm
- Width vertical carousel / carrier
- 3 675 mm / 3 050 mm
- Depth vertical carousel / carrier
- 1 471 mm / 528 mm
- Number of carriers
- 42 carriers
- Maximum weight per tray
- 200 kg
- Electronics
- 3/N/PE 400 V, 13 A
Frequently Asked Questions
A vertical carousel features a design in which the shelves are driven by a chain or belt in a carousel-like motion; the shelves rotate within the machine’s shaft and are then presented at the opening. A Vertical Lift Module, on the other hand, has an elevator that moves down the center of the module, where trays are stored on both the front and back sides. The elevator retrieves trays from inside the machine’s structure and then presents them at the picking opening.
A new, standard-equipped Vertical Storage System typically costs from 600,000 SEK (approx. 700,000 SEK). By choosing a used machine from Relevator, the investment cost can be significantly reduced. Our used Vertical Storage Systems typically cost between 175,000 and 450,000 SEK, depending on the Modell, manufacturing year, and condition.
Relevator always provides a performance warranty and, for installations, usually a machine warranty as well. The performance warranty means that we guarantee the machine we sell is in working order. The machine warranty means that if a defect arises as a result of the installation, we will repair it. The machine warranty covers the mechanics and installation, but any electronics faults are not covered by the warranty.
Yes, Relevator always uses the manufacturers' installation teams or specialized contractors with expertise in this type of service.
Related products
1,100+
Over 1,000 machine relocations completed for customers in various industries.
30+
We ship to businesses in more than 30 countries worldwide.
50%
On average, 50% less expensive than buying new.









