HomeVertical Storage SystemsVertical Carousels4 units Kardex Megamat RS 350 vertical carousels

Sold

Mats Åberg

Sales Manager

+46760266281

mats.aberg@relevator.se

4 units Kardex Megamat RS 350 vertical carousels

EUR 30,130

Overview

3 of 4 sold. 1 left ready for delivery.

4 Kardex Megamat RS 350 vertical carousels in good used condition and heights, these are machines that offer really compact storage.
3 units – 8 710 mm

The carriers of the vertical carousels racks are 3 050 mm wide and of the deepest model, 628 mm, which means that they can store a lot of goods per carrier. Each carrier is then equipped with 3 shelves, giving the machines the following total capacity:
2 units – 29 carriers, 58 shelves, total loadable 87 shelves = total storage area 167 m² on just over 6 m² floor space.

The units are equipped with the optional “Matrix strip”, an LED strip in the opening that can indicate the picking location horizontally and display e.g. article information. This functionality requires integration with ERP/WMS.

The vertical carousels have been serviced since installation and had relevant wear parts replaced.

Available now.
Shipping and installation is not included.

Technical Information

Model year
2016
Manufacturer
Kardex Remstar
Manufacturing year
1 unit 2016
Model
MEG RS 350.1.3050.6.533.29
Height vertical carousel / carrier
8 710 mm / Free height of carrier approx 470 mm
Width vertical carousel / carrier
3 675 mm / 3 050 mm
Depth vertical carousel / carrier
1 671 mm / 628 mm
Number of carriers and shelves
29 carriers / 87 shelves
Maximum weight per tray
228 - 350 kg depending on the number of shelves installed
Electronics
3/N/PE 400V, 16 A

Frequently Asked Questions

A vertical carousel features a design in which the shelves are driven by a chain or belt in a carousel-like motion; the shelves rotate within the machine’s shaft and are then presented at the opening. A Vertical Lift Module, on the other hand, has an elevator that moves down the center of the module, where trays are stored on both the front and back sides. The elevator retrieves trays from inside the machine’s structure and then presents them at the picking opening.

A new, standard-equipped Vertical Storage System typically costs from 600,000 SEK (approx. 700,000 SEK). By choosing a used machine from Relevator, the investment cost can be significantly reduced. Our used Vertical Storage Systems typically cost between 175,000 and 450,000 SEK, depending on the Modell, manufacturing year, and condition.

Relevator always provides a performance warranty and, for installations, usually a machine warranty as well. The performance warranty means that we guarantee the machine we sell is in working order. The machine warranty means that if a defect arises as a result of the installation, we will repair it. The machine warranty covers the mechanics and installation, but any electronics faults are not covered by the warranty.

Yes, Relevator always uses the manufacturers' installation teams or specialized contractors with expertise in this type of service.

1,100+

Over 1,000 machine relocations completed for customers in various industries.

30+

We ship to businesses in more than 30 countries worldwide.

50%

On average, 50% less expensive than buying new.

Contact us